Blackbird Surf


INTRODUCTION

A very efficient foil for Surf, Wing, and/or Windfoil.

The carbon front wing features a generous surface area, creating superb lift into flight mode, even at lower speeds. The Surf foil is available with three different options; large, medium or small. A shorter fuselage creates excellent maneuverability and very fluid performance in the surf. The 75 cm mast provides a lower center of effort for a more controlled flight.

Get going quickly and keep riding with the Blackbird Surf 75.


Delivered with: Transport bag, fittings and Torx tool.





// Early take-off, ability to low-speed flight

// Excellent maneuverability in waves and on the flat

// A wide use range thanks to the adjustable stabilizer

// 100% compatible with the Simmer Style G1 foil accessories range.




SPECIFICATONS

MODEL NAMEFRONT WINGBACK WINGFUSELAGEMASTCONNECTOR
Alu 75 Large2000 cm2 Carbon310 cm2 Carbon65 cm Alu75 cm AluStandard: Double rail
Alu 75 Small1300 cm2 Carbon310 cm2 Carbon65 cm Alu75 cm AluStandard: Double rail
Alu 75 Medium1600 cm2 Carbon310 cm2 Carbon65 cm Alu75 cm AluStandard: Double rail





Blackbird Front Wing 2000 cm2  Large

The large carbon front wing addresses the needs of foilers who want to get going and keep flying in light-wind conditions.

Material // Carbon

Wingspan //  1000 mm

Chord Width // 295 mm

Chord Thickness // 28 mm

Area // 2000 cm2

Aspect Ratio // 4:0

Screws // 3 x M8 28 mm


Blackbird Front Wing 1600 cm2  Medium

Carbon front wing addresses the needs of foilers who want to get going in low to medium winds. The perfect blend of lift and
maneuverability.

Material // Carbon

Wingspan //  940 mm

Chord Width // 200 mm

Chord Thickness // 26 mm

Area // 1600 cm2

Aspect Ratio // 4:7

Screws // 3 x M8 28 mm

Blackbird Front Wing 1300 cm2 Small

The small Carbon front wing addresses the needs of the foilers who want maximum control and maneuverability when the conditions are on.

Material // Carbon

Wingspan //  920 mm

Chord Width // 168 mm

Chord Thickness // 22 mm

Area // 1300 cm2

Aspect Ratio // 5:5

Screws // 3 x M8 28 mm


Blackbird Rear Wing 310 cm2

Engineered with a flat profile combined with an 85 mm chord, the 310 cm2 Carbon Rear Wing gives ideal performance in the waves and on the flat. The adjustable fin slots allow you to tune the back stabilizer for either more lift or higher speed.

Material // Carbon

Wingspan //  480 mm

Chord Width // 85 mm

Chord Thickness // 8 mm

Area // 310 cm2

Aspect Ratio // 5:6

Screws // 2 x M8 21 mm


Fuselage 65 cm

The Blackbird Alu Fuselage seamlessly connects to any size wings in the Simmer Style range. The fuselage is manufactured from lightweight and extremely strong CNC machined high-grade aluminum, which is anodized for maximum longevity. The short length creates excellent maneuverability and a very fluid performance in the surf.

Fittings to the mast // 2 x M8 30 mm


Aluminum Mast 75 cm

The Blackbird Aluminium mast provides an extremely strong connection between your board and your wings. The mast is manufactured from light-weight and extremely strong CNC machined high-grade aluminum, which is anodized for maximum longevity. The mast is compatible with both the Double Rail Plate and the Deep Tuttle connection.




Double Rail Base Plate

The Blackbird Surf Foil comes standard with a Double Rail Plate. But the mast can be fitted with several options to connect with the board including Tuttle and Deep Tuttle. All versions are securely fastened to the mast using three M8 45 mm flathead screws. The base plate is machined out of solid blocks of high-quality aluminum using CNC techniques to ensure that the geometry of the connection is perfect.


Fittings Included

  • Front wing // 3 pcs M8 28 mm
  • Back wing // 2 pcs M8 21 mm
  • Fuselage to mast // 2 pcs M8 30 MM
  • M8 Torx tool







© 2021-2022 Copyright by SIMMER STYLE