Sale!

Blackbird Surf

Price range: 520 USD through 950 USD

We’ve engineered the Surf Foil to make your foiling journey easier, get you over the hump faster, and shorten your learning curve — making it the ideal starter kit for progressing in all foil disciplines. Whether you’re new to foiling or pushing your surfing to the next level, the Blackbird Surf is built to work with you from the very first session.

Available in three wing size configurations — large, medium, and small — mean you can choose the setup that matches your weight, skill level, and conditions. Start with the larger wing for easy, forgiving lift, and work your way down as your confidence grows. No guesswork, just more time on the water doing what you love.

The shorter fuselage delivers a natural, responsive feel that follows every shift of your body weight, making the foil intuitive to control and genuinely fun to ride in the surf.

When it comes to the mast, the choice is yours. Go with the aluminium setup for a reliable, durable ride that’s easy on the wallet, or step up to the  Surf Carbon Mast for a lighter ( 1.9 kg), stiffer connection that unlocks the full performance potential of the foil.

Delivered with: Transport bag, fittings, and Torx tool.

Show more

Featured riders

Fully Interchangeable

All Blackbird wings, masts, and fuselages are fully interchangeable with a seamlessly secure connection. All M8 Torx stainless screws.

SPECIFICATONS

productfront wingback wingfuselagemast (CM)conntector
Surf Carbon 85 LargeCarbon 2000 cm2Carbon 310 cm2Alu 65 cmCarbon 85 cmDouble rail
Surf Carbon 85 MediumCarbon 1600 cm2Carbon 310 cm2Alu 65 cmCarbon 85 cmDouble rail
Surf Carbon 85 SmallCarbon 1300 cm2Carbon 310 cm2Alu 65 cmCarbon 85 cmDouble rail
Surf Alu 75 LargeCarbon 2000 cm2Carbon 310 cm2Alu 65 cmAlu 75 cmDouble rail
Surf Alu 75 MediumCarbon 1600 cm2Carbon 310 cm2Alu 65 cmAlu 75 cmDouble rail
Surf Alu 75 SmallCarbon 1300 cm2Carbon 310 cm2Alu 65 cmAlu 75 cmDouble rail

Blackbird Front Wing 2000 cm2 // Large

The large carbon front wing addresses the needs of foilers who want to get going and keep flying in light-wind conditions.

Material // Carbon

Wingspan // 1000 mm

Chord Width // 295 mm

Chord Thickness // 28 mm

Area // 2000 cm2

Aspect Ratio // 4:0

Screws // 3 x M8 28 mm

Blackbird Front Wing 1600 cm2 // Medium

Carbon front wing addresses the needs of foilers who want to get going in low to medium winds. The perfect blend of lift and
maneuverability.

Material // Carbon

Wingspan // 940 mm

Chord Width // 200 mm

Chord Thickness // 26 mm

Area // 1600 cm2

Aspect Ratio // 4:7

Screws // 3 x M8 28 mm

Blackbird Front Wing 1300 cm2 // Small

The small Carbon front wing addresses the needs of the foilers who want maximum control and maneuverability when the conditions are on.

Material // Carbon

Wingspan // 920 mm

Chord Width // 168 mm

Chord Thickness // 22 mm

Area // 1300 cm2

Aspect Ratio // 5:5

Screws // 3 x M8 28 mm

Blackbird Rear Wing 310 cm2

Engineered with a flat profile combined with an 85 mm chord, the 310 cm2 Carbon Rear Wing gives ideal performance in the waves and on the flat. The adjustable fin slots allow you to tune the back stabilizer for either more lift or higher speed.

Material // Carbon

Wingspan // 480 mm

Chord Width // 85 mm

Chord Thickness // 8 mm

Area // 310 cm2

Aspect Ratio // 5:6

Screws // 2 x M8 21 mm

The Carbon Surf 85

The Carbon Surf 85 mast is a one-piece design, for ideal strength and seamless connection between your board and foil. It is designed with a high-tech molded pre-preg carbon construction with a very lightweight PVC core. The same high-quality carbon is used on our top-of-line carbon windsurfing masts and as seen on our foil wings.

The lighter weight and stiffer performance will create an enhanced feel to the Blackbird foils, with a more direct and immediate response. The mast is wider and thicker towards the top and thinner towards the base to give minimum resistance in the water.

Aluminum Mast 75

The Blackbird Aluminium mast provides an extremely strong connection between your board and your wings. The mast is manufactured from lightweight and extremely strong CNC machined high-grade aluminum, which is anodized for maximum longevity. The mast is compatible with both the Double Rail Plate and the Deep Tuttle connection.