// FREERACE BEAST
2,530 USD – 2,640 USD
Insane top speeds with full control at all times, even in the choppiest water you can find. The Monster gives you total confidence sheet in and just go for it! This is what make the Monster on the of the most fierce freerace weapons available. The outline is craftet to give the board maximum control in all conditions, with more parallel rails towards the middle to keep a wider nose. This is import to generate as early planing as possible. The one step tail cut out creates release which keeps the control even at high speeds due to the reduced of wetted-surface area. A generous amount of V towards the nose to absorb chops and give the boards a smooth and user-friendly performance. The monster features all the winning performance features seen on the 3XS but in a more user friendly package, pure freerace firepower for the people.
This top-quality and technologically advanced high-spec Biax Carbon has a perfect weight-to-stiffness ratio due to its very fine weave and dynamic flex. For extreme stiffness, the bottom features 30 degrees Bias Carbon and PVC sandwich, and for strength, the deck features 45-degree Bias Carbon with double PVC sandwich for durability. For optimal load distribution and durability, the construction features a PVC stringer in the spine of the boards. The rails are reinforced with direction carbon to create optimal stiffness-to-weight ratio. We have shaved off every possible gram using a thinner layer of brushed paint. The artwork is applied with water-based tattoo stickers, very light-weight with beautiful bold colors. Even the non-slip has been reduced where it is not needed. We also use a self-regulating Goretex © Airvent which allows air to pass back and forth between the foam core and the exterior of the board whilst being completely waterproof. The double-layer membrane of Goretex on either side of a rubber O-ring prevents pressure build-up inside the board, minimizing the risk for de-lamination caused by overpressure inside the board.
Hot-Coat Finish
All G6 boards feature a hot-coat paint finish. This process combines the colour pigment with the outer layer of a hard epoxy gel coat, this improves the board colour longevity, making it almost impossible to stratch off, it produces an extremely UV-resistant coating that ensures the boards colour resists fading in strong sunlight, all of this whilst saving weight by replacing the base coat paint, and two layers of top coat paint
| size (L) | length (CM) | width (CM) | fin setup (CM) | fin range (CM) | finbox | foil ready | sail (M2) | weight |
|---|---|---|---|---|---|---|---|---|
| 106 | 231 | 70 | Delivered without fin | 36-38 | tuttle box | no | 6.2 - 8.6 | 6.45 kg |
| 116 | 231 | 74 | Delivered without fin | 38-40 | tuttle box | no | 7.0 - 9.2 | 6.65 kg |
| 126 | 230 | 82 | Delivered without fin | 42-44 | deep tuttle | yes | 7.8 - 9.6 | 7.50 kg |
| 136 | 230 | 86 | Delivered without fin | 46-48 | deep tuttle | yes | 7.8 - 10.0 | 7.95 kg |
Tail cutouts
The Monster G6 features a wider tail to generate more power, and the tail cutouts provide a release to create control in tricky conditions or when strong gusts hit you. Load up and release is the name of the game for speed.
Recessed deck
Recessed deck in the mastfoot area, keeping the rig connection low with boosting control.
Contours
The rocker line is flat from the tail to the front foot, then with smooth curve to the nose with a Vee shape that begins at cut-outs with a climax at the mid body. Designed for unprecedented control and confidence. Calm and composed in rougher conditions with relentless acceleration.
New foot pads
Dual-density EVA foot pads; 4 mm + 4 mm thickness. Textured with a diamond grip for superhero traction.
SELF REGULATING GORETEX © AIRVENT
The Monster comes standard with a self-regulating Goretex © Air vent which allows air to pass back and forth between the foam core and the exterior of the board, whilst being completely waterproof. The double-layer membrane of Goretex on either side of a rubber O-ring prevents pressure build-up inside the board, minimizing the risk of delamination caused by overpressure inside the board even during a flight. You’ll never need to unscrew an air vent screw again.
Foil ready
126 and 136 are foil compatible with a reinforced deep tuttle box.
Products
Information
News
